Chapter 1 Introduction
1.1 Research Object and Main Content of Structural Analysis
1.2 Simplified Diagrams for Structural Calculations
1.3 Types of Loads
1.4 Classification of Framed Structures
Chapter 2 Geometric Construction Analysis of Structures
2.1 Geometric Construction of Structures
2.2 Concept of Degrees of Freedom and Restraints
2.3 Geometric Construction Rules of Planar Stable Framed Systems
2.4 Relationship Between Static Determinacy and Geometric Construction of Structures
Chapter 3 Internal Force Calculation of Statically Determinate Structure
3.1 Calculation of Statically Determinate Beams
3.2 Plane Statically Determinate Rigid Frames
3.3 Three Hinged Arches
3.4 Plane Statically Determinate Trusses and Composite Structres
3.5 General Remarks on Statically Determinate Structures
Chapter 4 Principle of Virtual Work and Displacements of Structures
4.1 Introduction for Calculation of Structural Displacement
4.2 Virtual Work and Principle of Virtual Work
4.3 General Equation and Unit Load Method for Computing Displacements
4.4 Calculation of Displacements Caused by Loads
4.5 Graph-Multiplication Method
4.6 Reciprocal Laws for Linear Elastic System
Chapter 5 Force Method
5.1 Concepts of Statically Indeterminate Structures and Statically Indeterminate Times
5.2 Basic Concept of Force Method
5.3 Statically Indeterminate Beams，Rigid Frames and Bent Frames
5.4 Analysis of Symmetric Structures
5.5 Internal Forces due to Temperature Changes and Support Settlements
5.6 Computation of Displacements of Statically Indeterminate Structures
5.7 Checking the Final Internal Diagram of Statically Indeterminate Structure
5.8 Statically Indeterminate Arches
5.9 Properties of Statically Indeterminate Structures
Chapter 6 Displacement Method
6.1 Fundamental Concepts of Displacement Method
6.2 Equation of Angular Displacement of Straight Bar with Equal Section
6.3 Primary Unknowns and Primary Systems in Displacement Method
6.4 Displacement-Method Equations
6.5 Development of Displacement-Method Equations by Direct Stiffness Method
Chapter 7 Method of Successive Approximations
7.1 Concepts and Terminology in Moment Distribution Method
7.2 Moment Distribution at a Single Joint— Moment-Distribution Process
7.3 Moment Distributions at Multi-Joints— Successive Approximations
Chapter 8 Influence Line
8.1 Concept of Influence Lines
8.2 Influence Lines for Statically Determinate Single Span Beams by Static Method
8.3 Influence Lines for Girders with Floor Systems
8.4 Influence Lines for Trusses by Using Static Method
8.5 Virtual Displacement Method for Constructing Influence Lines for Statically Determinate Beams
8.6 Application of Influence Lines
