1 Introduction
1.1 Definitions and Functions
1.2 Classification and Composition
1.2.1 Classification
1.2.2 Composition
1.3 Primary Power Subsystem
1.3.1 Power Generation Technologies
1.3.2 Power Storage Technology
1.3.3 Power Control Technology
1.4 System Circuit Subsystem (SCS)
1.4.1 Power Distribution Architecture
1.4.2 Tasks and Configuration of SCS
1.4.3 Overcurrent Protection Technology
1.5 Development Process of Spacecraft Power System
1.5.1 Development Phases
1.5.2 Development Process
1.6 Power System Evaluation
1.7 Development of Spacecraft Power System in China
1.7.1 Development of Spacecraft Power System Technology
1.7.2 Development of Spacecraft Power Distribution Technology and SCS Technology
References
2 Design of Primary Power Subsystem
2.1 Design Basis and Constraints
2.1.1 Space Environment and Its Effects
2.1.2 Flight Mission
2.1.3 Mutual Constraints in the Design of Spacecraft Power System
2.1.4 Flight Procedure
2.1.5 Lighting Conditions
2.1.6 Payload Configuration and Load Characteristics
2.2 Power System Topology
2.2.1 Bus Voltage
2.2.2 Bus Configuration
2.2.3 Power Regulation of Solar Arrays
2.2.4 Energy Transfer Method
2.2.5 Bus Voltage Regulation Methods
2.2.6 Installation of Solar Array
2.3 Design and Calculation of Power System
2.3.1 Solar Array
2.3.2 Battery Pack
2.3.3 Power Control Unit (PCU)
2.3.4 Energy Balance Analysis
References
3 Design of System Circuit Subsystem (SCS)
3.1 General
3.2 Working Environment and Constraints
3.2.1 Electromagnetic Environment
3.2.2 Mechanical Environment
3.2.3 Thermal Environment
3.2.4 Space Environment
3.2.5 Other Environments
3.3 System Design
3.3.1 Design of Load Power Priority
3.3.2 Design of Distribution Bus System
3.3.3 Design of Distribution Bus Control
3.3.4 Bus Protection Design
3.4 Design of Grounding and Lapping
3.4.1 Design of Grounding System
3.4.2 Design of Spacecraft Grounding and Lapping
3.4.3 Design Examples of Spacecraft Grounding and Lapping
3.5 Design of System Circuit Interfaces
3.5.1 General
3.5.2 Design of Interface Between Satellite (Spacecraft) and Rocket
3.5.3 Design of Interface Between Satellite (Spacecraft) and Ground
3.5.4 Design of Other Key Interfaces
3.6 Design of System Circuit
3.6.1 Power Distribution Unit (PDU)
3.6.2 EED Manager
3.6.3 Cable Harness
References
4 Design Example of Power System
4.1 Design Example of Power System of GEO Satellite
4.1.1 Design Conditions
4.1.2 System Design
4.1.3 Solar Array Design
4.1.4 Design of Battery Pack
4.1.5 Design of Power Control Unit (PCU)
4.2 Design Example of Power System of the Satellite
in Sun-Synchronous Orbit
4.2.1 Design Conditions
4.2.2 System Design
4.2.3 Solar Array Design
4.2.4 Design of Battery Packs
4.2.5 PCU Design
4.3 Design Example of Power System of Deep-Space
Exploration
4.3.1 System Design
4.3.2 Design of Solar Array on Lander
4.3.3 Design of Lander Battery Pack
4.3.4 Design of Lander Power Control
4.3.5 Sleep/Wake Design
4.3.6 Technology of Energy Reuse Among Multiple Devices
References
5 Reliability and Safety Design for Power System
5.1 Design Overview
5.2 Prediction and Allocation of Quantitative Reliability
Indicators
5.2.1 Establishment of Reliability Model
5.2.2 Reliability Prediction
5.2.3 Reliability Allocation
5.3 Thermal Design and Mechanical Environment Resistance
Design
5.3.1 Thermal Design
5.3.2 Mechanical Environment Resistance Design
5.4 Design of Derating and Redundancy Margin
5.4.1 Derating Desi